Peripheral – Self Priming Pumps
Description
The Peripheral Self Priming Pumps are used in domestic and overhead tanks, curing at construction sites, pressure boosting system at homes, fountains and small irrigations.
Salient Features
- High quality extruded aluminium body.
- Double sealed precision ball bearings with life lubrication.
- Fitted with motor protector.
- Stainless steel shaft.
- Forged brass impeller which is electronically balanced.
- Graded cast iron pump casing and motor bearing housing.
- Mechanical seal with high alumina seal face.
- TEFC capacitor start and run motor.
- Single (or) Three phase options.
- Capacitor housed in the capacitor box on top of the aluminium body in Deeluxe models.
- 1.5 m length extra cord for convenient installation for DEELUXE models.
| S.No | Model | Power kW(HP) | Suction Lift m(ft) | Total Head on Metre | Pipe mm(inch) | Weight Kgs | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Discharge in Litres per Minute | |||||||||||||||||
| 1Phase | 3Phase | 6 | 12 | 18 | 24 | 30 | 36 | 42 | 45 | 50 | 56 | sction | Delivery | ||||
| 1 | MS0SDE | 0.18(0.25) | 8(25) | 23 | 18 | 13 | – | – | – | – | – | – | – | 19(3/4″) | 19(3/4″) | 8.61 | |
| 2 | MS1SDE | 0.37(0.50) | 8(25) | 40 | 32 | 24 | 20 | 15 | 25(1″) | 25(1″) | 8.25 | ||||||
| 3 | MS2SKJ | 0.37(0.50) | 8(25) | 35 | 30 | 20 | 18 | – | 25(1″) | 25(1″) | 6.3 | ||||||
| 4 | MS2S | MS2T | 0.37(0.50) | 8(25) | 40 | 32 | 24 | 20 | 15 | 25(1″) | 25(1″) | 9.5 | |||||
| 5 | MS2SD | MS2TD | 0.37(0.50) | 8(25) | 40 | 30 | 24 | 20 | 15 | 25(1″) | 25(1″) | 8.9 | |||||
| 6 | MS2ST/MS2STDB | MS2T | 0.37(0.50) | 8(25) | 40 | 30 | 24 | 20 | 15 | 25(1″) | 25(1″) | 8.25 | |||||
| 7 | MS2SWS | 0.37(0.50) | 8(25) | 40 | 32 | 24 | 20 | 15 | 25(1″) | 25(1″) | 12.1 | ||||||
| 8 | MS2SMS | 0.37(0.50) | 8(25) | 30 | 20 | 15 | 5 | 25(1″) | 25(1″) | 11.15 | |||||||
| 9 | MS4SD | MS4TD | 0.55(0.75) | 8(25) | 47 | 44 | 38 | 32 | 26 | 20 | 15 | 25(1″) | 25(1″) | 11.15 | |||
| 10 | MS5S | MS5T | 0.75(1.00) | 8(25) | 55 | 49 | 44 | 38 | 32 | 24 | 17 | 14 | 25(1″) | 25(1″) | 12.50 | ||
| 11 | MS5SD | MS5TD | 0.75(1.00) | 8(25) | 55 | 49 | 44 | 38 | 32 | 24 | 17 | 14 | 25(1″) | 25(1″) | 12.56 | ||
| 12 | MS5SS | MS5TS | 0.82(1.1) | 8(25) | 65 | 62 | 58 | 52 | 43 | 39 | 31 | 23 | 18 | 10 | 25(1″) | 25(1″) | 15.4 |
Additional information
| Model | MS0SDE, MS1SDE, MS2SKJ, MS2S, MS2SD, MS2ST/MS2STDB, MS2SWS, MS2SMS, MS4SD, MS5S, MS5SD, MS5SS, MS2T – 9.5, MS2TD, MS2T – 8.25, MS4TD, MS5T, MS5TD, MS5TS |
|---|
Related products
Peripheral Non Self Priming Pump
The Peripheral Non Self Priming Pumps are used in domestic overhead tanks, curing at construction sites, pressure boosting system at homes, fountains
Peripheral Non Self Priming Pump
The Peripheral Non Self Priming Pumps are used in domestic overhead tanks, curing at construction sites, pressure boosting system at homes, fountains
Pressure Boosting Pump
The Multistage Horizontal Centrifugal Pumps represent the latest design in hydraulic technology. It generates a very good pressure and at the same
Pressure Boosting Pump
The Multistage Horizontal Centrifugal Pumps represent the latest design in hydraulic technology. It generates a very good pressure and at the same
Openwell Submersible Pump
Openwell Submersible pump sets are used to lift water from smaller wells, tanks & sumps. The pump set weighs less and also
Openwell Submersible Pump
Openwell Submersible pump sets are used to lift water from smaller wells, tanks & sumps. The pump set weighs less and also
Centrifugal Pumps – Flange Types
The Centrifugal Pumps with single centrifugal impeller are suitable for pumping clean water and fluids which are not chemically aggressive. They are
Centrifugal Pumps – Flange Types
The Centrifugal Pumps with single centrifugal impeller are suitable for pumping clean water and fluids which are not chemically aggressive. They are
V4 Submersible Pumps
“SHARP” Submersible Pumpsets are multistage, centrifugal pumps used to lift water from smaller borewells. Since Noryl plastic impellers are used in the
V4 Submersible Pumps
“SHARP” Submersible Pumpsets are multistage, centrifugal pumps used to lift water from smaller borewells. Since Noryl plastic impellers are used in the
Centrifugal Pumps – Thread Types
The Centrifugal Pumps with single centrifugal impeller are suitable for pumping clean water and fluids which are not chemically aggressive. They are
Centrifugal Pumps – Thread Types
The Centrifugal Pumps with single centrifugal impeller are suitable for pumping clean water and fluids which are not chemically aggressive. They are
Deepwell Jet Pumps
The DEEPWELL JET Series CENTRIFUGAL JET PUMPS are designed to achieve high discharge at high/low heads. The shape of the impeller transmits
Deepwell Jet Pumps
The DEEPWELL JET Series CENTRIFUGAL JET PUMPS are designed to achieve high discharge at high/low heads. The shape of the impeller transmits
Reviews
There are no reviews yet.